THINK NOW ABOUT TOMORROW!
AFFORDABLE TO ANYONE
3 lines of products:
• Economy line
• Standard line
• Maintenance FREE line
EXCELLENT RETURN ON INVESTMENT
•
Built to provide same quality for 20+ years
•
Durability that exceeds duration of concession periods
− Special, carefully chosen, long-lasting construction materials
− Choice of only industrial and military range components and electronics
− Multiple certified production process (EU, China, USA)
− Proven in operation for more than 15 years
− Certified in aging tests
− No degradation of light intensity during life-cycle - low current LED drive without multiplexing
− 30% of production time dedicated to testing
•
Extremely reduced power consumption comparing to standard products on the market
- Less than 50 W/m2 for 30% of active pixels
LOWERS INFRASTRUCTURE AND INSTALLATION COSTS
• Reduced weight - use of adequate materials and optimized construction results with up to 15% lighter product than standard on the market - requires less robust gantries and reduces manipulation costs
• No need for cabling - solar power supported; multiple wireless interfaces supported (3G, GPRS, GSM, Bluetooth, radio modem, WiFi)
WON’T LET YOU DOWN
• Suitable even for military environments (temperature -40 to +60°C, humidity 0-100%, winds up to 200 km/h, vibrations, ice, snow, freezing rain, blowing sand)
• MTBF › 50.000 h; Availability › 99,99% - automotive industry technologies, redundancy of important components, minimized number of mechanical contacts
• Totally under user control – advanced diagnostics of all VMS functionalities at any point in time - includes status of each component, cold state LED testing, usage statistics of aging elements (fans, LED)
TAILORED FOR YOU
• Flexibility for your application - available in any size, pixel pitch and housing execution (front & rear access, “anti-graffiti”, additional heat protection…) - over 150 different models available
• Connectable to any existing system - certified and proven compliance to most widely used protocols (TCP/IP, NTCIP, PROFIBUS, MODBUS, XML-OPC, TLS); ability of customization to any user protocols (numerous examples of implemented projects)
DESIGNED TO ACCOMPLISH TRAFFIC SAFETY
• Outstanding appearance for recognition in 1 second - Telegra’s unique certified Press Fit® lens cap system provides distinctively clear, recognizable, focused to the driver and uniform messages easy to recognize in distances ranging from 50 to 400 m
• No limits for information transfer -
any true type font, in
any formatting style, in
any language, combined with any predefined bitmap, in any color, in
one single message
• Smart failsafe operation -
traffic safety guaranteed - performs constant self-testing and evaluates if message is recognizable - only correct message will be sent to the driver
MAINTAINABLE WITHIN SECONDS
• Quick plug & play module replacement - less than 3 minutes without tools
• Only 4 different spare parts interchangeable between all Telegra VMS’s - LED module, controller, PSU, environment sensor
• Self-cleaning front face, easy to replace LED lens
• Spare parts interchangeable with other Telegra ATMS equipment
PROVEN BY OTHERS
• Conforms to most stringent categories of
European and US standards (EN12966 certified; NTCIP & NEMA-TS4 compliant; MIL tested)
NEW & OUTSTANDING!
MAINTENANCE FREE LIGHT WEIGHT VARIABLE MESSAGE SIGN
• Reduces infrastructure costs up to 30%
• Designed to eliminate servicing of VMS panel during life-time
• Extended manufacturer warranty: 5+ years
Maintenance FREE light weight is
NEW line of VMS’s manufactured by Telegra - please contact us for more information.
ADDED VALUE TO YOUR SYSTEM WHEN INTEGRATED IN ATMS THROUGH topXview™
• Increases safety - executes safety algorithms based on traffic, meteorological and incident detection data
• Eliminates unnecessary costs - provides common interface for all field elements of ATMS
GENERAL TECHNICAL DATA
Mechanical and environmental properties
| Housing material |
Aluminum alloy 2 or 3 mm thickness or stainless steel |
| Front plate material |
Aluminum alloy plate 2 or 3 mm thickness or stainless steel |
| Wind load |
up to WL7, according to EN12966 |
| Point load |
PL0, according to EN12966 |
| Snow load |
up to DSL2, according to EN12966 |
| Deflections, bending |
TDB2, according to EN12966 |
| Deflections, torsion |
TDT0, according to EN12966 |
| Housing coating |
Painted / powder coated in wanted RAL |
| Front plate coating |
Low reflection black matt plate, CE certifi ed |
| Drainage |
Drainage cap |
| Ventilation |
Natural diagonal ventilation, positive pressure ventilation system, thermostatically and VMS controller controlled |
| Housing opening |
Front or rear side |
| Locking system |
Quarter turn locking system with stainless steel hinges |
| Door stop system |
Yes, upon request |
| Protection level |
P2, P3 (IP55 - IP66), according to EN12966 |
| Pollution resistance |
Pollution degree D3 and D4, according to EN12966 |
| Ambiente temperature rang |
T1, T2, T3 (-40…+60ºC), according to EN12966 |
Functional properties
| Power supply |
AC Supply |
Single phase 120/240 VAC, 60 Hz; 230 VAC, 50 Hz (-15% to +10%) Three phase 380 VAC, 50 Hz (-15% to +10%) |
| DC Supply |
12 - 48 V |
| Over-voltage/current and surge protection |
Varistors, fuses, opto-couplers, suppressors, gas dischargers |
| Pixel color |
Mono, dual color or RGB |
| Pixel pitch |
minimum 8 mm mono, 12 mm RGB |
| Intensity regulation |
0-100% continuous, automatically adjusted luxmeters on front and back of sign |
| Luminance |
L3, according to EN12966 |
| Color |
C2, according to EN12966 |
| Beam width |
B1-B6, according to EN12966 |
| Contrast ratio |
R2-R3, according to EN12966 |
| Internal communication |
CAN bus |
| Power supply redundancy |
Optionally - 2n or n+1 |
| Communication interface |
RS-232/RS-422/RS-485 serial port, ethernet 10/100/1000 base-TX, RJ-45 connector, optional Bluetooth, wireless 802.11g, GSM/GPRS |
| Service port |
RS-232 / ethernet |
| Protocol compliance |
TCP/IP, NTCIP 1203 v.1 & v.2, OPC XML-DA, PROFIBUS DP, VICnet, (BermDRIP), DGT PVV, TLS, TLSoIP |
| Functionality |
Cold-state LED testing,anti-aliasing , true-type fonts, long-term data memory (optionally) |
SIGNS FOR SPECIFIC APPLICATIONS
LED VARIABLE MESSAGE SIGNS WITH PREDEFINED PICTOGRAMS
Used in applications where predefined set of messages will only be communicated to the drivers, such as tunnel or open road, signs with predefined pictograms are proven as robust and reliable devices that serve their purpose virtually without any maintenance need while providing precise and accurate information to the drivers.
Same features apply as for fully programmable LED signs.
Specific technical data
Pictogram design - Approved by BASt, ASFiNAG
- Compliant with EN 12966 recommendations
- Custom made according to project requirements
FULLY PROGRAMMABLE LED DISPLAY FOR MOBILE APPLICATIONS
Rear end collisions are the most common type of traffic incidents on road sections where road works, repairs, maintenance or something similar is taking place. Most often causes are sudden need to significantly slow down the speed, appearance of stopped cars, queues and traffic jams as the result of diminished traffic surface, appearance of closed lanes etc.
Main cause of accidents beside careless drivers, speeding and disrespect of safety distance is the lack of on time information of changing traffic conditions ahead.
Use of traffic trailers or similar mobile and easily placed in operation LED based signs allows provision of correct and on time information at the most appropriate location.
Properly applied, these systems significantly increase safety to both drivers and workers whose operation is creating these traffic conditions with increased danger level.
Specific technical data
| Design and customization |
Customized for any kind of trailer |
| Option for ultra-thin housings |
| Control features |
PDA manager for control |
| Pre-programmed sequences for particular traffic condition |
| Automatic GPS and compass based locating through topXviewTM software |
| Ability to change messages using GSM/GPRS based communications on remotely placed trailers, fail-safe and with complete control of what is displayed |
| Control box |
Custom designed |
| Keyboard control or touch screen GUI control |
| Analog voltage measurement option (battery power monitoring) |
| Certification |
Automotive EMC certified |
| Radiated Emission, according to CISPR 12 (2001) |
| Radiated Immunity, 20 MHz - 1 GHz, according to ISO 11451-2 (2001) |
LED MATRIX SPEED DISPLAY
Speed awareness has proven to be effective in reducing driver speed in many areas where these systems have been placed including school zones, residential neighborhoods, as well as random police selected locations.
Telegra has developed speed awareness systems that can be manufactured to your specifications, which are reliable and combine most advanced technology of Telegra’s LED displays, speed measurement and vehicle classification technology.
Speed displays are radar or other speed measurement device-activated signs that dynamically display approaching vehicle speeds while at the same time they can count and classify passed vehicles.
Incoming vehicle speed can be displayed in user defined color, both steady and blinking. Multiple thresholds for blinking and change of color are adjustable. Blinking frequency is also adjustable.
Traffic safety and measurement is now available through Telegra’s LED matrix speed display!
Same features apply as for fully programmable LED signs.
Specific technical data
| Functional features |
Communication with control centre optionally |
| PC or PDA Bluetooth based control of the display |
| Battery, solar or network power feeding |
| Web based graphical user interface |
FTP downloadable counting & classification data
up to 100.000 measurements in non-volatile memory (speed, class, time & date) |
| Radar characteristics |
Operating band: K band |
| Operating frequency: 24.165 GHz +/- 5MHz |
| Power output: 5 mW |
| Detection distance range: Up to 360 m |
| GSM/GPRS communication module |
Quad band EGSM 850/900/1.800/1.900 MHz |
Output power:
Class 4 (2 W) @ 850/900 MHz
Class 1 (1 W) @ 1.800/1.900 MHz |
| Integrated SIM card holder |
| Baud rate: 9.600 bps |
| Bluetooth communication module |
Protocol version 2.0 |
| Operating frequency: 2,400 to 2,4835 GHz |
| Tx power: 18 dBm (class 1, up to 100 m) |
